【LWIP】使用socket write丢数据的问题

tao_oYMYe · 发表于 2020-7-17 11:01:49

自己移植了ucosiii 加 lwip 2.1.2，这几天测试，代码做客户端发送数据给上位机，上位机接收的数据很多都是断句，一句正常一句断的那种，测试还字发送了200字节，不知道有什么问题，希望各路大神帮忙瞧上一眼。

先上soket发送这部分代码

#include "tcp_server_demo.h"
#include "lwip/opt.h"
#include "lwip_comm.h"
#include "led.h"
#include "lwip/lwip_sys.h"
#include "lwip/api.h"
#include <lwip/sockets.h>
u8 tcp_server_recvbuf[TCP_SERVER_RX_BUFSIZE]; //TCP客户端接收数据缓冲区
u8 tcp_server_sendbuf[]="0123456789abcdefghijklmnopqrstuvwxyz,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,YZ9876543210\r\n\
0123456789abcdefghijklmnopqrstuvwxyz,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,YZ9876543210 \r\n";
u8 tcp_server_flag; //TCP服务器数据发送标志位
const char tcp_server_addr[] = "192.168.1.124";
//tcp服务器任务
void tcp_server_thread(void *arg)
{
OS_ERR err;
int sock_fd = -1;
u32 num = 0;
int error = -1,len_t = 0;
struct sockaddr_in client_addr;
OSTimeDlyHMSM(0,0,1,0,OS_OPT_TIME_HMSM_STRICT,&err);
while(1)
{
//创建tcp套接字
sock_fd = socket(AF_INET, SOCK_STREAM, 0);
if(sock_fd < 0)
{
printf("Failed to request Socket memory!\r\n");
OSTimeDlyHMSM(0,0,1,0,OS_OPT_TIME_HMSM_STRICT,&err);
continue;
}
//设置socket 为 Non-blocking模式
int flags = fcntl(sock_fd, F_GETFL, 0);
fcntl(sock_fd, F_SETFL, flags|O_NONBLOCK);
client_addr.sin_family = AF_INET;
client_addr.sin_port = htons(TCP_SERVER_PORT);
client_addr.sin_addr.s_addr = inet_addr(tcp_server_addr);
memset(&(client_addr.sin_zero), 0, sizeof(client_addr.sin_zero));
// connect 连接服务器，在Non-blocking模式下立即返回
if(connect(sock_fd, (struct sockaddr *)&client_addr, sizeof(struct sockaddr)) < 0)
{
if(errno != EINPROGRESS)
{
printf("connect failed! len = %d, num = %d\r\n",sizeof(tcp_server_sendbuf), num);
closesocket(sock_fd);
OSTimeDlyHMSM(0,0,1,0,OS_OPT_TIME_HMSM_STRICT,&err);//1s 重连一次
continue;
}
else
{
fd_set rfds, wfds;
struct timeval tv;
FD_ZERO(&rfds);
FD_ZERO(&wfds);
FD_SET(sock_fd, &rfds);
FD_SET(sock_fd, &wfds);
/* set select() time out */
tv.tv_sec = 10;
tv.tv_usec = 0;
if(select(sock_fd + 1, &rfds, &wfds, NULL, &tv) > 0)
{
if(FD_ISSET(sock_fd, &rfds) && FD_ISSET(sock_fd, &wfds))
{
socklen_t len = sizeof(error);
if(getsockopt(sock_fd, SOL_SOCKET, SO_ERROR, &error, (socklen_t *)&len) < 0)
{
printf("getsockopt error!!!\r\n");
printf("3connect failed! len = %d, num = %d\r\n",sizeof(tcp_server_sendbuf), num);
closesocket(sock_fd);
OSTimeDlyHMSM(0,0,1,0,OS_OPT_TIME_HMSM_STRICT,&err);//1s 重连一次
continue;
}
else
{
if(error == 0)
{
//printf(" OOOOOOOOOOOKKKKKKKKKKKKKKKKK\r\n");
}
else
{
printf("connect getsockopt error!!!\n");
printf("3connect failed! len = %d, num = %d\r\n",sizeof(tcp_server_sendbuf), num);
closesocket(sock_fd);
OSTimeDlyHMSM(0,0,1,0,OS_OPT_TIME_HMSM_STRICT,&err);//1s 重连一次
continue;
}
}
}
else if(!FD_ISSET(sock_fd, &rfds) && FD_ISSET(sock_fd, &wfds))
{
//printf(" 2OOOOOOOOOOOKKKKKKKKKKKKKKKKK\r\n");
}
}
else
{
printf("3connect failed! len = %d, num = %d\r\n",sizeof(tcp_server_sendbuf), num);
closesocket(sock_fd);
OSTimeDlyHMSM(0,0,1,0,OS_OPT_TIME_HMSM_STRICT,&err);//1s 重连一次
continue;
}
}
}
//fcntl(sock_fd, F_SETFL, flags&~O_NONBLOCK);
printf("Connect to server: %s successful!\r\n", tcp_server_addr);
while(1)
{
//接收数据
len_t = read(sock_fd, tcp_server_recvbuf, TCP_SERVER_RX_BUFSIZE);
if(len_t < 0)
{
//printf("socket read error!\r\n");
}
else
{
printf("socket read len = %d ,buf = %s\r\n", len_t, tcp_server_recvbuf);
}
num++;
//发送数据
if(write(sock_fd, tcp_server_sendbuf, sizeof(tcp_server_sendbuf)) < 0)
{
if(errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
{
//printf();
}
else
{
printf("socket send data error!\r\n");
break;
}
}
}
closesocket(sock_fd);
}
}

复制代码

然后配置了几个发送有关的参数，如下截图

最后是上位机接收的数据，很多都丢失了，
2020-07-17 10-39-47屏幕截图.png

以下是我的工程，希望有大神指点一下，谢谢谢谢

ucosiii移植lwip2.1.2.zip (5.51 MB, 下载次数: 3)

tao_oYMYe · 发表于 2020-7-17 15:35:08

同一个工程，使用netconn 写的服务器端，发送就没有这个问题，可能跟我设置的非阻塞模式有点关系，搞不懂

void tcp_server_thread(void *arg)
{
CPU_SR_ALLOC();
u32 data_len = 0;
struct pbuf *q;
err_t err,recv_err;
u8 remot_addr[4];
struct netconn *conn, *newconn;
static ip_addr_t ipaddr;
static u16_t port;
u32 num = 0;
LWIP_UNUSED_ARG(arg);
conn = netconn_new(NETCONN_TCP); //创建一个TCP链接
netconn_bind(conn,IP_ADDR_ANY,TCP_SERVER_PORT); //绑定端口 8号端口
netconn_listen(conn); //进入监听模式
conn->recv_timeout = 10; //禁止阻塞线程等待10ms
while (1)
{
err = netconn_accept(conn,&newconn); //接收连接请求
if(err==ERR_OK)newconn->recv_timeout = 10;
if (err == ERR_OK) //处理新连接的数据
{
struct netbuf *recvbuf;
netconn_getaddr(newconn,&ipaddr,&port,0); //获取远端IP地址和端口号
remot_addr[3] = (uint8_t)(ipaddr.addr >> 24);
remot_addr[2] = (uint8_t)(ipaddr.addr>> 16);
remot_addr[1] = (uint8_t)(ipaddr.addr >> 8);
remot_addr[0] = (uint8_t)(ipaddr.addr);
printf("主机%d.%d.%d.%d连接上服务器,主机端口号为:%d , len = %d\r\n",remot_addr[0], remot_addr[1],remot_addr[2],remot_addr[3],port, sizeof(tcp_server_sendbuf));
while(1)
{
num++;
err = netconn_write(newconn ,tcp_server_sendbuf,strlen((char*)tcp_server_sendbuf),NETCONN_COPY); //发送tcp_server_sendbuf中的数据
if(err != ERR_OK)
{
printf("发送失败\r\n");
netconn_close(newconn);
netconn_delete(newconn);
printf("主机:%d.%d.%d.%d断开与服务器的连接 num = %d\r\n",remot_addr[0], remot_addr[1],remot_addr[2],remot_addr[3], num);
break;
}
}
}
}
}

复制代码

账号		自动登录	找回密码
密码			注册

【LWIP】使用socket write丢数据的问题

主题推荐

浏览过的版块