新手小白求助，cubeide下载报错

18915069752

Open On-Chip Debugger 0.12.0+dev-00608-gd8ed48fef (2025-02-06-11:17) [https://github.com/STMicroelectronics/OpenOCD]
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: JTAG supported
Info : CMSIS-DAP: Atomic commands supported
Info : CMSIS-DAP: Test domain timer supported
Info : CMSIS-DAP: FW Version = 2.0.0
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 1 TDO = 1 nTRST = 0 nRESET = 0
Info : Connecting under reset
Info : CMSIS-DAP: Interface ready
Info : clock speed 8000 kHz
Info : SWD DPIDR 0x2ba01477
Info : [STM32F407ZGTx.cpu] Cortex-M4 r0p1 processor detected
Info : [STM32F407ZGTx.cpu] target has 6 breakpoints, 4 watchpoints
Info : [STM32F407ZGTx.cpu] Examination succeed
Info : starting gdb server for STM32F407ZGTx.cpu on 3333
Info : Listening on port 3333 for gdb connections
Info : [STM32F407ZGTx.cpu] external reset detected
Info : accepting 'gdb' connection on tcp/3333
[STM32F407ZGTx.cpu] halted due to breakpoint, current mode: Thread
xPSR: 0x01000000 pc: 0x08000870 msp: 0x20020000
configuring PLL
Info : device id = 0x101f6413
Info : flash size = 1024 KiB
Info : accepting 'gdb' connection on tcp/3333
[STM32F407ZGTx.cpu] halted due to breakpoint, current mode: Thread
xPSR: 0x01000000 pc: 0x08000870 msp: 0x20020000
configuring PLL
Error: [STM32F407ZGTx.cpu] clearing lockup after double fault
Error: error waiting for target flash write algorithm
Error: error writing to flash at address 0x08000000 at offset 0x00000000
[STM32F407ZGTx.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
Info : dropped 'gdb' connection
shutdown command invoked
Info : dropped 'gdb' connection

菠萝片

用的什么下载器的，先检查接线，在keil这种软件上看看是否能识别到下载器与芯片

18915069752

菠萝片 发表于 2025-7-11 09:59
用的什么下载器的，先检查接线，在keil这种软件上看看是否能识别到下载器与芯片 ...

用的FireDAP新款高速版下载的，我没有用keil

菠萝片

18915069752 发表于 2025-7-14 08:41
用的FireDAP新款高速版下载的，我没有用keil

最好就是keil来直接看看，keil可以直观的看到是否识别到芯片与下载器，cubeide这种配置有问题的也无法直观的看到的

菠萝片

https://www.firebbs.cn/forum.php ... p;highlight=cubeIDE在IDE上使用dap的安这个来配置看看，在修改文件的时候reset_config srst_only srst_nogate connect_assert_srst这个也改为reset_config trst_only