被搞得蛋疼的跑马灯的程序

weijian

我发现火哥自己写的程序里面那个STM32FX_CON.H是有注释的 ，但自己建立工程后查看STM32FX_CON.H里面，的内容是没有注释的，下午写了这样一个按视频教程写的  一直报出这样的错误，求解
..\..\User\main.c(19): error:  #5: cannot open source input file "bsp_led.h": No such file or directory
compiling stm32f10x_it.c...
compiling bsp_led.c...
..\..\User\Led\bsp_led.c(27): error:  #20: identifier "GPIO_InitTypeDef" is undefined
..\..\User\Led\bsp_led.c(30): warning:  #223-D: function "RCC_APB2PeriphClockCmd" declared implicitly
..\..\User\Led\bsp_led.c(30): error:  #20: identifier "RCC_APB2Periph_GPIOB" is undefined
..\..\User\Led\bsp_led.c(30): error:  #20: identifier "RCC_APB2Periph_GPIOF" is undefined
..\..\User\Led\bsp_led.c(30): error:  #20: identifier "ENABLE" is undefined
..\..\User\Led\bsp_led.c(33): error:  #20: identifier "GPIO_Pin_0" is undefined
..\..\User\Led\bsp_led.c(36): error:  #20: identifier "GPIO_Mode_Out_PP" is undefined
..\..\User\Led\bsp_led.c(39): error:  #20: identifier "GPIO_Speed_50MHz" is undefined
..\..\User\Led\bsp_led.c(42): warning:  #223-D: function "GPIO_Init" declared implicitly
..\..\User\Led\bsp_led.c(42): error:  #20: identifier "GPIOB" is undefined
..\..\User\Led\bsp_led.c(45): error:  #20: identifier "GPIO_Pin_7" is undefined
..\..\User\Led\bsp_led.c(48): error:  #20: identifier "GPIOF" is undefined
..\..\User\Led\bsp_led.c(51): error:  #20: identifier "GPIO_Pin_8" is undefined
..\..\User\Led\bsp_led.c(57): warning:  #223-D: function "GPIO_SetBits" declared implicitly
"..\..\Output\ledd.axf" - 12 Errors, 3 Warning(s).

施叶丰

bsp_led.h这个文件找不到，你没有添加头文件路径吧

weijian

施叶丰 发表于 2014-4-17 20:54
bsp_led.h这个文件找不到，你没有添加头文件路径吧

那个有添加的

weijian

施叶丰 发表于 2014-4-17 20:54
bsp_led.h这个文件找不到，你没有添加头文件路径吧

重点是第二个没定义结构体 很纠结啊